Training children in 360° content creation

An essential part of scaffolding digital learning when using emerging technology in schools is the provision of developmentally appropriate training on using platforms to meet learning objectives. While there is a lot of talk about generations Y and Z being digital natives, there is great variability in the capability of children and young people in using digital tools for learning, especially when it is comes to creating rather than consuming products.

Throughout the Athelstone School project we have thought carefully about training and supporting primary school aged students (11 – 12years) in using the 360° VRTY platform or content creation.  In 2019 we did a pilot study using VRTY with Year 5 students which helped us hone the training approach. In this phase of the study student training was conducted via teleconference and lasted 40 minutes. VRTY personnel delivered the training, while the teachers and researcher were on hand to assist. This initial training involved a general introduction to using the platform to create virtual worlds in screen mode. We used a ‘sticky note’ exercise to evaluate the training where students writing down their comments on a post-it note about the training so that we could gauge the class’s training experience. This exercise revealed most students enjoyed the training but that some found it challenging as the examples below show.

Some student feedback from the first training exercise.

In 2020, we expanded the training and support approach to include an additional teleconference session on how to save and share virtual content with others in screen and immersive modes. VRTY designed a special handbook for students on this step-by-step process. This handbook was printed out and put on each desk for easy referral. This supplemented to in-platform tutorials and information, providing an option for students who might prefer more conventional reference material to support learning. This in-class training was undertaken via conference which we already had practice with before the necessity of conducting such sessions due to COVID restrictions.

Training in action from the student perspective.

One of the learning objectives for the unit of work was that students could use the on-desk training handbook effectively for assistance to trouble-shoot issues as they arose. The evaluation indicated that all students met this learning objective.

Our experience shows that primary school students may need different training and resource approaches to build confidence and scaffolding them towards competence in using 360° content creation tools. The training response included provision of in-platform instructions and tutorials with a back-up paper-based manual available on student desks. Once confidence was developed, students played and learnt through this process too. Multi-pronged training approaches coupled with practice and play makes perfect.

Training in progress 21st century style.

This post bought to you by A/Prof Erica Southgate, the VRTY team Kingston Lee-Young and Sarah Lee and the teachers of Athelstone School.

‘Persi in Citta’ unit of work for the Athelstone School VR project

Developing units of work that allow for student VR content creation involves: (a) sequencing and scaffolding learning for curriculum-mandated content and skill acquisition; and, (b) allowing time for students to develop new technology expertise via problem-solving, creative experimentation and collaboration.

In the Athelstone School VR project, primary (elementary) school students use the 360° VRTY platform to create a travel journey that demonstrates Italian language acquisition and knowledge of Italian culture. The learning objectives derive directly from the Australian Curriculum.

Below is the unit of work ‘Persi in Citta’ (Lost in the City), developed for the VR project by Athelstone language teacher Angelica Cardone and Jo Romeo. The unit of work was implemented this term with primary school students in Year 6 (11-12 years of age).

………………………………………………………………………………….

‘Persi in Citta’ (Lost in the City) unit of work

Learning Intention – to use and develop directional language in the VR platform whilst creating different scenes in Italian cities.

Lesson 1

  • Introduce the booklets and go through it as a class (VRTY student handbook)
  • Re – familiarize themselves with the platform and look at where students were in Term 1 in terms of importing 360 degree images, information markers, portal markers and importing pictures etc.
  • Allow time to work on their world.

Lesson 2

  • Students to work on their information markers, limit to at least 4 per picture or scene.
  • Information marker must have information about the landmark they have chosen to use, information must be in English and have the Italian translation.

Lesson 3

  • After information markers have been used and checked by the teacher students to use portal markers so they can move through scenes.
  • Once portal markers have been used to move in and out of scenes directions will need to be written in to allow others to use the world as a new traveller to Italy. E.g. – Excuse me where is the Colosseum? Scusa dov’e` il Colosseo?

Lesson 4

  • Use directional language learnt in lessons and put them in their scenes.
  • Portal markers will need to transport the visitors to the location.

Lesson 5

  • Proposal to use the headsets and phones to view the worlds they have created in the VRTY platform. Proposal to use the 360 camera for producing own images to import into the VRTY platform.

Australian Curriculum Achievement Standards

Communication

  • Informing – Gather information from a range of sources (ACLITC043) and represent information appropriately for different audiences using a variety of modes (ACLITC044).
  • Creating – Create imaginative texts for different audiences such as digital stories using characters, places, ideas and events (ACLITC046)
  • Translating – Create simple bi lingual texts and discuss what translates easily or not (ACLITC048)

Understanding

  • Systems of Language – Use grammatical knowledge to interpret and create meaning in Italian (ACLITU052)
  • Language variation and change – Recognise that language use varies according to the context of situation and culture (ACLITU054)

Success criteria

 YesDeveloping
Can student import a 360 degree image correctly.  
Can student import an information marker and use effectively.  
Student can import a portal marker and use effectively.  
Student can use directional language appropriately to navigate through the scene.  
Was able to work collaboratively in pairs or small groups.  
Used the student handbook effectively for assistance if required.  

In addition to the Languages Curriculum outcomes the unit of work develops the following Level 4 General Capabilities from the Australian Curriculum:

ICT CAPABILITY

Investigating with ICT

  • Locate generate and access data and information: locate, retrieve or generate information using search engines and simple search functions and classify information in meaningful ways

Creating with ICT

  • Generate ideas plans and processes: use ICT effectively to record ideas, represent thinking and plan solutions
  • Generate solutions to challenges and learning area tasks: independently or collaboratively create and modify digital solutions, creative outputs or data representation/transformation for articular audiences and purposes

Communicating with ICT

  • Collaborate share and exchange: select and use appropriate ICT tools safely to share and exchange information and to safely collaborate with others

CRITICAL AND CREATIVE THINKING CAPABILITY

Inquiring – identifying, exploring and organising information and ideas

  • Identify and clarify information and ideas: identify and clarify relevant information and prioritise ideas
  • Organise and process information: analyse, condense and combine relevant information from multiple sources

Generating ideas, possibilities and actions

  • Imagine possibilities and connect ideas: combine ideas in a variety of ways and from a range of sources to create new possibilities

PERSONAL AND SOCIAL CAPABILITY

Self-management

  • Work independently and show initiative: assess the value of working independently, and taking initiative to do so where appropriate
  • Become confident resilient and adaptable: devise strategies and formulate plans to assist in the completion of challenging tasks and the maintenance of personal safety

Social management

  • Communicate effectively: identify and explain factors that influence effective communication in a variety of situations
  • Work collaboratively: contribute to groups and teams, suggesting improvements in methods used for group investigations and projects
  • Make decisions: identify factors that influence decision making and consider the usefulness of these in making their own decisions

Using VRTY for language learning

In 2019, VRTY partnered with the Athelstone School and the VR School Study to investigate how primary school students could create 360° environments to enhance language learning, in this case Italian. VRTY was created in 2016 to help make virtual reality more accessible to educators and students. Its founders wanted to improve educational approaches by bringing-to-life 21st Century learning outcomes.

So what is it really? VRTY is a VR and interactive 360° content creation and sharing software platform. It lives in the cloud and its benefit is its ability to help anyone create their own virtual content. There’s no need to code because the platform provides its own easy-to-use tools to let the imagination run free, enact design thinking, problem-solve, prototype and create and share feedback with others.

Being cloud based, there are no specific hardware requirements to use the platform; all you need is a computer with Google or safari browsers and an internet connection. To share a newly created project, it can be shared via a QR code or unique web address (URL). When viewing a project, it can be viewed in 360°mode on any device with a google or safari browser; and to view in VR mode it can be viewed using a mobile and a VR cardboard or mobile headset.

Using VRTY 360° in education has the potential to

  • Increase student engagement;
  • Facilitate higher order thinking and collaboration;
  • Allow students to demonstrate content mastery through the creation of their own media-rich virtual environments;
  • Develop ICT capability area of the National Curriculum integrated across learning areas; and
  • Authentically share content that can be used across the education community.

VRTY provides online training on the platform and an in-class teleconference training session (which is pictured above). Founder, Kingston Lee-Young is enjoying the Athelstone School collaboration, offering the following insights:

“As software developers, we had a vision of creating something that would improve the learning environment and benefit both teachers and students. Partnering with the Athelstone School allows us to see our VRTY platform in action in the hands of Years 5 and 6 students learning Italian. Whilst the involvement of the VR School Study means we are being measured to see if we are truly adding value.”

The photo above shows Kingston and Sarah Lee (VR Producer at VRTY) providing online training to Athelstone School students.

For more information about VRTY or to see some of its shareable content please head to: https://vrty.io

New study on 360° VR for primary school language learning

The VR School Study is in a new partnership with Athelstone School, a South Australian primary (elementary) school. The Athelstone School research will investigate how 360° VR content creation can be used for learning Italian. Funded by the South Australian Department of Education’s Innovative Language Program Grants (ILPG) program, Year 5 and 6 students will use the VRTY platform to create and share their own virtual worlds guided by the Australian curriculum. This action research has already undergone a pilot phase that happened in the second half of 2019 and we are now entering into the first of  several research cycles in order to explore technical challenges, developmental appropriateness of 360° VR, and the efficacy and innovative potential of 360° VR content creation for learning another language.

The teacher co-researchers on the project are language teachers Angelica Cardone (far left behind) and Jo Romeo (left front on top image), and Principal Gyllian Godfrey (back centre) who is also a qualified language teacher.  Gyllian provided this reflection on the project:

“The ILPG has offered the opportunity to test the benefits of VR for students
learning languages at primary level and has also upped-the-ante by making
students the creators of their own content, by developing non-linear language
learning narratives for themselves and their peers.”

In our next blog, the folks from VRTY explain how students can use their platform for content creation and learning.  Stay tuned.

Bought to you by A/Prof Erica Southgate who is taking up a lot of room (right front) in the photo above.

Some cool stuff from the VR Book

This article was first published by the Australian Association for Research in Education (29 June, 2020). I’m sharing it here because it highlights some interesting findings from the book.

Virtual Reality in school education: Australia leads the way with groundbreaking research

By Erica Southgate

In 2016, I attended a meeting and fortuitously sat next to the (now retired) principal of Callaghan College who asked me what type of research I’d like to do in schools. At the time a new high-end, highly immersive type of virtual reality (VR) hardware called the Oculus Rift had been released. This type of VR equipment was costly and needed an expensive computer to run but offered entry into amazing worlds. It provided high fidelity environments to be explored through gestural interaction via controllers that allowed you to use your virtual hands to interact with virtual objects and avatars (either other people or computer characters) and navigate in ways that felt incredibly embodied (I am addicted to flying and jumping off clouds in VR).

 I made a gentle pitch that I’d like to work with teachers to embed this technology into classrooms to see how it could be used for learning but that I had no idea what we might find. And so began the VR School Study, a collaboration with Callaghan College and later, Dungog High School, both government high schools in NSW, Australia.  It became the first research internationally to embed high-end VR in school classrooms.

VR School Study

The VR School Study is ongoing participatory research that aims to explore the use of immersive virtual reality in real classrooms. We focus on how VR can be used to enhance learning, its relationship to curriculum, and its implications for pedagogy. And we examine all the practical, ethical and safety issues that come with integrating emerging technology in classrooms. At the end 2018, the study reached a major milestone with the completion of two major case studies into the use of the technology in secondary schools.

An ‘arduous’ adventure in emerging technology

IN 2018, on the last day of research at Callaghan College, I interviewed two teachers about what it was like to embed an emerging technology in the classroom. The response was, ‘Arduous comes to mind.’ While we did have a laugh, the comment summed up a range of issues encountered during the research.

Space to accommodate VR and safety concerns

Trying to find an available classroom space large enough to accommodate the play areas needed for this VR, which is best used standing and moving around, proved difficult. On one campus we managed to get a room with a small storeroom off it that squeezed in three sets of VR equipment with play areas while at the other we had a larger former lab-preparation room attached to a classroom. Both VR rooms were beyond the immediate supervisory gaze of the teacher and so required me or a student to act as a safety ‘spotter’ to ensure there were no collisions with walls, furniture or peers. Even though there is a built in ‘Guardian System’ (a pop-up virtual cage mapped to the real environment you should stay within), some students became so immersed that they ignored it and needed intervention. Even now with ‘pass through’ cameras in some VR headsets (these allow the user to see the outside environment when they go beyond the Guardian System) some people become so immersed and are interacting with such speed that they can run into objects. Engineered safety solutions are not always enough to maintain safety.

Network and server issues

Getting the tech to work within the confines of the school internet network proved difficult. Game stores that allow multiplayer environments were blocked and internet work-arounds required. Teachers had to set-up individual student accounts which was time-consuming and often update applications in their own time. Our screen capture video, which showed a first-person view of what the student was seeing and doing in a virtual environment, indicated that the technology failed 15% of the time due to network, server and VR tracking drop-out. One of my favourite moments in student humour and resilience was when I heard one boy say to another as they who were fixing a server issue for the third time, “Aren’t you glad you signed up for this?”.

Content mastery and creativity through collaboration

Students were given the highest quality VR and ‘sandbox’ applications, such as Minecraft VR and Tilt Brush which allowed them to create in virtual environments without needing to code. Combined with clever curriculum design they undertook self-directed formative assessment tasks.

In Year 9 science this involved groups researching and developing a model of a body organ in Minecraft VR. The results were an astounding mix of scientific knowledge melded with creative endeavour developed through group problem-solving and collaboration inside and outside of VR.

Brain from up high

One group produced an anatomically correct, labelled eyeball which was toured by via a rollercoaster while another built a skyscraper of a brain sitting atop a spinal cord which you flew up to interact with engineered components representing neurons. While in VR, students narrated from memory the parts and function of the brain. Analysis of the screen capture video using a framework adapted from  work by Assistant Professor in Learning and Learning Processes the University of Oulu, Jonna Malmberg, indicated that the majority of students used the creative properties of VR to engage in highly collaborative science learning.

Inside the brain

At Dungog High School a senior drama class used single-player 3-D sculpting program Tilt Brush, as an infinite virtual design studio to explore symbolism in set design at real life scale and beyond. Students worked in groups to quickly prototype symbolic elements of their directorial vision with peers and the teacher moving in and out of VR to offer feedback. Mistakes were erased or changes made at the press of a button. The virtual studio of Tilt Brush melded with the drama studio to offer students an opportunity to view their design in 3D from the perspective of an audience member, director, designer or actor. All they needed to do was teleport round the virtual environment to do this.

Let’s leave behind the EdTech evangelism

An admission – I’m not a fan of the type of innovation discourse which permeates university managerial-speak and is associated with EdTech (educational technology) evangelism. This type of talk conjures up images of momentous leaps in ways of doing and knowing with the trope of the lone (male, yes it is a gendered) genius leading the charge with their vision of the future.

Innovation is incorrectly depicted as a development shortcut detached from contexts and the years of work that yield incremental improvements and insights, as Stanford University Director, Christian Seelos, and colleague Johanna Mair, argue. They warn against evaluating innovation only on positive outcomes as this can stifle experimentation required to progress an initiative in difficult or unpredictable environments.

This aligns with critical studies in EdTech where research is on the ‘state-of-the-actual’ rather than the ‘state-of-the-art’, as Distinguished Research Professor in the Faculty of Education, Monash University, Neil Selwyn reminds us. It entails moving away from trying to ‘prove’ a technology works for learning to scrutinizing what actually takes place especially in contexts that are not the ‘model’ well-resourced schools where technologies are often tested.

Teleporting away for now

As I have argued elsewhere, to get the best ethical and educational outcomes with emerging technologies we must carefully incubate these in schools (and not just resource-rich ones) in collaboration with willing teachers so that we can document incremental ‘innovation’ through ‘state-of-the-actual’ reporting. This can be an arduous project but one full of authentic and valuable insights for those willing to go on a research and pedagogical adventure. It’s this type of evidence, not EdTech evangelism, that we need.

For those who want more. In May 2020, I published findings from the study in Virtual Reality in Curriculum and Pedagogy: Evidence from Secondary Classrooms (Routledge). As co-researchers, teachers from Callaghan College and Dungog High School contributed to their respective chapters in this book. The book offers new pedagogical frameworks for understanding how to best use the properties of VR for deeper learning as well as a ‘state-of-the-actual’ account of the ethical, practical and technical aspects of using VR in low-income school communities.

Erica Southgate (PhD) is Associate Professor of Emerging Technologies for Education at the University of Newcastle, Australia. She is lead author of the recent Australian Government commissioned report, Artificial intelligence and emerging technologies (virtual, augmented and mixed reality) in schools research report, and a maker of computer games for literacy learning. Erica is always looking for brave teachers to collaborate with on research and can be contacted at Erica.southgate@newcastle.edu.au. Erica is on Twitter@EricaSouthgate

This article was originally published on EduResearch Matters. Read the original article.AARE

NEW book from the VR School Study

Out of three years of co-research with teachers comes the first book (of many I hope) from the VR School Study. The book, Virtual Reality in Curriculum and Pedagogy: Evidence from Secondary Classrooms (2020 Routledge) provides a brand new pedagogical framework with scaffolds for educators on how to use the technology for deeper learning. Case studies from Callaghan College and Dungog High School are included with a focus on metacognition, collaboration and creativity.

Blog SS

Immerse + Imagine with Michelle Brown

Could you tell me about your professional background Michelle?

I studied Multimedia in the early 2000s and began to incorporate technology into my arts practice, I did a lot of computer design work for musicians, bands and venues back then. About this time I also started working and playing in the music industry. I ended up managing one of Australia’s iconic community radio stations, 4ZZZ in Brisbane, so I didn’t have much time to spend on my art, but I did manage to keep producing work occasionally! Being connected to an industry like music gave me a great bunch of opportunities but I decided to leave 4ZZZ in 2016 to concentrate on a career creating art and producing content.

When did you first get interested in VR and why?

In 2016 while I was finishing up my management role I saw some really cool stuff being created with augmented and virtual reality. I started to look into what I needed to get a VR set up and also started producing AR artwork, I already had the animation and illustration skills plus the tech knowledge so it all just kind of fell into place! The biggest barrier for VR is the expense of the equipment however things are getting cheaper with stand-alone headsets like the Quest available, at the time I had to invest in a PC (I was strictly a mac user for a long time!) and a HTC Vive. Some of the artists I saw producing VR artwork include Liz Edwards, a very cool 3D artist, which got me into a VR art app called Tilt Brush, which I’ve used ever since in my workflow, from music videos to large scale installation work.

How do you currently use VR?

I mainly work with some of the VR art apps/programs like Google’s Tilt Brush, Gravity Sketch and some of the animation programs like Tvori. I paint and create environments and worlds in VR that are the base for music videos, installation work and more. Just like a 3D modelling program, many of the VR apps allow you to export 3D creations that can be used in other apps, like Unity, or traditional film editing software like Premiere Pro.

I also teach workshops in using VR and AR in arts practice, so showing ways that you can integrate illustration and animation with mobile apps and teaching people about the art apps I’ve mentioned.

What are your thoughts on VR and the creative process?

For me I love it, it really cuts down on the amount of time I spend hand illustrating or animating. The same with 3D modelling, it would take me possibly 3 times the amount of time to create something in Cinema4D that I can model quickly in VR as it’s more attune to actual sculpting/painting.

I also feel that VR can create more of an impactful experience, when you are in a headset it’s easy to ignore everything else going on and just concentrate on the narrative or user experience, no social media distractions!

What advice would you give teachers and students who are thinking about using VR for creative projects?

Allow a bit of time for all students to have a play in VR, even if you only have one or two headsets! If you are showing students how to use some of the art programs like Tilt Brush, you need to let them have a little time to get comfortable and creative. But also keep in mind taking breaks if you’re in the headset for more than 30 minutes at a time. I also would recommend giving some direction so that students experimenting with VR art have something to focus on rather than just aimlessly painting swirls, for example; get them to paint a favourite animal or cartoon.

What is unique about creating in VR instead of some other medium?

It’s mainly the speed of which I can get an idea out plus the fact it’s in a three dimensional space, it’s just so much quicker for me to produce a visual story. It’s also a way that I can communicate a theme or an idea that links to a social issue that I can address with my installation work, as it allows for more intimacy and less distraction. Being immersed in a 3D environment by yourself in the headset provides a great opportunity to just focus.

Check out Michelle’s VR art and more on her website https://www.thebadlament.com/

MB

Immerse + Imagine with Alex Bowles

Could you tell us about your professional background Alex?

I came to VR from a background in film and television production, mostly advertising. I got my start at Industrial Light + Magic (ILM) in their commercial production division. This is also where I got my introduction to a lot of the tools that have become central to VR development, like virtual cameras, 3D modelling, CG animation, and rendering pipelines.

At the time, I was less interested in the on-screen possibilities of digital effects and more interested in the ways that the tools and techniques used for effects work were changing the production process itself. Pre-visualization was especially attractive.

I loved the idea of creating virtual sets that allowed creative and production teams to explore their ideas in this relatively cheap, very elastic, and super forgiving design space. Everything about it was the exact opposite of physical production. To me, it was clear that decoupling design from execution was hugely liberating in creative terms, but also a great way to reduce a project’s risks. That’s a rare combination. The key was having a virtual production that offered enough detail, precision, and accuracy to reliably map decisions made there to the real world.

When did you first get interested in VR and why?

A few years ago I’d been researching a program for the full-dome theaters used in science centers, natural history museums, and planetariums. The story focused on the overlapping histories of astronomy and cartography. It revealed the ways that increasingly accurate models of the cosmos led to increasingly accurate maps of the world, and by extension, what people were capable of doing within the world. The goal was to make mathematics, science, and technology more accessible to middle-school and high-school students by providing them with a clear view of how they all worked together. This type of interdisciplinary understanding can make learning abstract concepts a lot easier. It can also be very hard to come by in educational systems based on strict compartmentalization of subjects. That’s where third-parties like public science institutions come in.

The problem I found was that the places with these immersive displays couldn’t offer the economic support that this particular program required. I also discovered that these institutions shared a somewhat Balkanized culture. This made co-productions especially difficult, at least for an outside producer like myself. When Oculus announced that it was going to be making full immersion available at consumer-electronics prices, I thought wow, here’s a way to get the program developed and distributed properly.

This proved less straightforward than I imagined. As a friend of mine likes to point out, you should never mistake a clear view for a short distance. It turned out that the technology was both more complex and more nascent than I initially guessed. That’s where I realized my background wasn’t serving me well. When you’re used to life in a very mature ecosystem, you take so much for granted that simply doesn’t exist in an ecosystem that’s just getting started. Even so, I was absolutely hooked. There’s a particular kind of engagement that you get in VR that I haven’t experienced anywhere else. And I think the ability to actually develop an ecosystem around that is a once-in-a-lifetime opportunity.

How do you currently use VR?

First and foremost, the best way to create VR is in VR. This is easier said than done, since so many of the tools, from 3D modeling software to game engines, were all developed with flat screens in mind. This makes it very easy to lose touch with the sense of presence in real space that’s key to the best experiences. The more of the process you can bring into an immersive display, the better.

I also use it for some things I never expected. One of them is fitness. I checked out games like Beat Saber and Pistol Whip just because they were getting a lot of buzz, but then I heard about people who were making them a part of regular workout routines, and getting really great results within 3-4 months and wow, yeah, they were right.

One of my favourite uses is bringing global and spatial context to news stories. Google Earth VR is fantastic for this. Simply being able to go to a place, even virtually, has this really remarkable effect on the way you understand stories, and connect them to other stories. This is due to the very different ways our brains encode spatial memories, as opposed to strictly visual memories. Once you’ve got a place-based component to your understanding, you have a much easier time absorbing retaining, and remembering everything else you learn about a topic. It’s amazing.

That phenomena is actually the basis for what I’m working on professionally, which is outreach programs for historical and culturally important sites. By giving people who haven’t visited these places in person the kinds of spatial memories shared by those who have, it becomes possible to expand the community of those who value a given place, who understand why it’s so important, and who are willing to put effort and resources into preservation.

What are your thoughts on VR and the creative process?

Let me start by narrowing that to the creative process used by film and television production, since that’s the one I know best. The biggest thing I’ve discovered is that you have to get your target audience involved a lot earlier than you would for a 2D medium. Partly, this is because immersive media doesn’t offer a century-plus of accumulated knowledge embedded in institutional structures, production tools, and so on. You can’t count on tried and true best practices to get you most of the way to a finished piece because at this stage, best practices are little more than well-educated guesses.

The other reason to make user testing an intrinsic part of the creative process is that audiences have so much more agency in immersive programs. Even game developers—who are used to having everything based on player input—have a ton of unfamiliar dynamics to manage when people are fully present in a scene, rather than interacting only via a controller and their thumbs. The more room you give people to surprise you, the more they will end up surprising you. This can be frustrating if you’re focused on a specific vision, so it’s helpful to remember that some of your most promising creative opportunities can come out of these unanticipated interactions. The sooner you can get a read, the better.

All this gets a lot easier if you recognize that the core of the medium isn’t what people see on a screen. The core is how they physically respond to events in three dimensional space. This is why it helps to get the basic physical interactions that are central to the experience prototyped and tested as early as you can, so you can use the feedback you get to determine the project’s final form.

This prototyping stage doesn’t need to be in VR, by the way. Some of the smartest studios I know rely heavily on brown-boxing, which is literally using cardboard boxes to work out where different elements should be placed in the space around users, and to make sure people can move around comfortably enough to enjoy the experience. Once that’s sorted, you can design the virtual experience on top of this real-world foundation.

What advice would you give teachers and students who are thinking about using VR for creative projects?

The first thing, and maybe most important thing to do is to experience as much of what’s already out there as you can. Paying close attention to what you do and don’t like should leave you with a general sense of direction.

One of the first things you’ll discover is that VR isn’t actually one technology so much as a bunch of different technologies that are being combined in new and interesting ways. These combinations are the source of a lot of excitement, but they can also be the source of a lot of frustration, especially since pipelines and interoperability standards are so nascent. As a friend of mine put it, in game development, everything takes three times longer than you think it will, and in VR, it takes three times longer than that. So do make a point of being kind to yourself. It’s very much a learning-by-doing effort, and you’re going to get it wrong, a lot. And don’t worry about feeling you don’t know everything about everything because you never will. It’s just too complex.

Eventually the field will deal with this complexity the same way that film and television production, and game development have. We’ll end up with armies of highly-specialised craftspeople who are deeply focused on specific details, and equipped with budgets and schedules to match. But at the moment, we’re nowhere close to that, and I suspect it’ll be many years before we are. For now, the field favours generalists. If this is attractive to you, the best thing is to start with something that seems super simple and purely exploratory, get others involved as early as you can, pay close attention to all the different ways they respond, then building the final product on whatever emerges. Keeping your mind open, especially at the outset, is going to be the most likely way to find your north star.

Immerse + Imagine with James Calvert

Could you tell us about your professional background James?

I started an animation studio called the People’s Republic of Animation when I was 18 years old with a couple of friends. The studio grew over the next 15 years and was producing animated films for global clients. I was, and still am a director and storyteller at heart. In addition to animation, I started and ran a small video games company called Six Foot Kid. Life as an academic only began four years ago when I joined Torrens University Australia, in the design and creative technology faculty.

When did you first get interested in VR and why?

I was working with the ABC in 2017, trekking along the Kokoda Track in Papua New Guinea, capturing material for the educational VR experience ‘Kokoda VR’, when my interest in VR really kicked in. I was immediately drawn to VR as a storytelling and educational medium that could transport users to immersive virtual worlds.

2Landscape Phone

How do you currently use VR?

Primarily for telling stories. As a researcher, I am exploring how an immersive story or narrative can benefit education in schools.

What are your thoughts on VR and the creative process?

I’ve spent my entire professional career embedded in the ‘creative process’. VR poses some new challenges to the creative process, due to the newness of the medium. Tricks and techniques that have been developed for video games or film making, need some adjustment before applying to VR development. Motion sickness is the prime example here. A great idea that might have worked in games or film, would need rethinking if it causes motion sickness when experienced in VR. However, obstacles such as this are important to the creative process and can always be overcome.

What advice would you give teachers and students who are thinking about using VR for creative projects?

Go for it! But always test your ideas in VR. The capacity for VR to provide truly memorable embodied moments is incredible. As a tool for creative projects, it is a very rich playground.

Jame’s latest project, Thin Ice VR, weaves together Ernest Shackleton’s Antarctic survival story with a tale on the effects of climate change.

 

New report & infographics on immersive learning

A/Prof Erica Southgate was commissioned by the Australian Government to produce research on emerging technologies for schools including current state-of-evidence, and pedagogical,practical and ethical advice. The project produced the Artificial Intelligence and Emerging Technologies  (virtual, augmented and mixed reality) in Schools Research Report, a short read version of the report written for teachers and infographic posters for students. You can find these here:

Full report – Artificial Intelligence and Emerging Technologies in Schools Research Report 

Short Read on Virtual Reality and Augmented Reality in Schools

VR and AR infographics for students

 

Blog at WordPress.com.

Up ↑